MITSUBISHI VFDs

  • A700
  • A701
  • D700
  • E700
  • F700
  • A800
  • F800

A700

 

1.Brochure
2.Manual
3.Wiring
4.Dimensions

A700 Series
Mitsubishi Electric’s RSV technology gives you class-leading power, control and flexibility.

  • Designed for use with 690V supplies
  • Wide speed range: 200:1 operating range is possible - even when the drive is used ‘open loop’
  • PLC feature: A700 programmability provides true intelligence inside the drive - a simple solution for complex applications
  • Easy gain tuning: Compensates automatically for changes in load inertia to ensure smooth and consistent operation
  • Fast response: Up to 300 radians / second speed response means lightning fast reaction to sudden load changes
  • USB port: Allows simple connection to the new FR-Configurator Software for quick and easy commissioning
  • Power down braking: Keeps the motor under control even if the supply power is lost
  • Remote I/O capability: All of the drive I/O can be read or controlled over a network
  • Integral Radio Filter: Limits Radio Noise emissions to meet EU Directive - all sizes of drive
  • Speed control: with or without torque limit allows 200:1 Speed range, driving or overhauling
  • Open Loop Torque Control: including torque at zero speed

more info

A701

 

1.Brochure
2.
Manual
3.Wiring
4.
Dimensions

A700 Series
Mitsubishi Electric’s RSV technology gives you class-leading power, control and flexibility.

  • Designed for use with 690V supplies
  • Wide speed range: 200:1 operating range is possible - even when the drive is used ‘open loop’
  • PLC feature: A700 programmability provides true intelligence inside the drive - a simple solution for complex applications
  • Easy gain tuning: Compensates automatically for changes in load inertia to ensure smooth and consistent operation
  • Fast response: Up to 300 radians / second speed response means lightning fast reaction to sudden load changes
  • USB port: Allows simple connection to the new FR-Configurator Software for quick and easy commissioning
  • Power down braking: Keeps the motor under control even if the supply power is lost
  • Remote I/O capability: All of the drive I/O can be read or controlled over a network
  • Integral Radio Filter: Limits Radio Noise emissions to meet EU Directive - all sizes of drive
  • Speed control: with or without torque limit allows 200:1 Speed range, driving or overhauling
  • Open Loop Torque Control: including torque at zero speed

more info

D700

 

1.Brochure
2.Manual
3.Wiring
4.Dimensions

The D700 is a low cost micro VFD with Mitsubishi Electric quality.

  • Simple to use: The D700 is perfect for a wide range of applications
  • Simple to set up: The integrated digital setting dial with display makes configuration fast and easy
  • Simple operation: Control remotely or with the
    built-in digital control
  • Simple to choose: Low cost and with Mitsubishi Electric quality ensuring long operation life
  • Capacity from 1/8 to 10 HP
  • Safety stop function meets EN954-1 Category 3 and IEC60204-1 Stop Category 0
  • Integrated brake chopper circuit
  • Modbus RTU included as standard via the RJ45 port
  • 150% torque at 1Hz and 200% torque at 3Hz using General-purpose Magnetic Flux Vector Control
  • Optimum Excitation Control for increased energy savings when motor is not loaded
  • Frequency search function for catching a spinning load
  • Dancer control allows position signal to control roll tension
  • Password function for parameter setting protection
  • Internal diagnostics function for monitoring status of critical components
  • RoHS compliant
  • 10 year maintenance free design
  • Compliance: UL, cUL, CE

more info

E700

 

1.Brochure
2.Manual
3.Wiring
4.Dimensions

The E700 Series is the cost-effective variable speed control solution for general purpose applications.

  • Available in 115V, 240V and 480V up to 20HP
  • Advanced Magnetic Flux Vector Control for improved starting torque and smooth low speed motor operation
  • Auto-tuning allows improved performance using virtually any manufacturer’s motor
  • All capacities include built-in brake chopper
  • Safety Stop function meets EN954-1 Category 3 and IEC60204-1 Stop Category 0
  • USB communications allow fast commissioning and troubleshooting
  • Standard RS-485 serial communications supporting Modbus® RTU
  • Sink / Source selectable I/O
  • Supports remote I/O function via network
  • Built-in PID Control
  • Delivers rated current at 50°C and 14.5kHz carrier frequency with minimal de-rating
  • 200% overload for 3 seconds
  • 0 to 10V analog output
  • CC-Link®, DeviceNet™, Profibus-DP, LonWorks®, EtherNet/IP
  • Standard 5 year warranty
  • Compliance: UL, cUL, CE

more info

F700

 

1.Brochure
2.Manual
3.Wiring
4.Dimensions

The truly fantastic specifications of the F700, make this VFD from Mitsubishi Electric an absolute must for your drive systems.

  • NEMA 1 UL Type 1 Enclosure Designs: Drive can be mounted as a stand-alone unit where required. (Plenum rated)
  • Built-in BACnet MS/TP
  • Built-in PLC; programs using GX Developer
  • Two I/O cards can be installed simultaneously
  • Remote I/O capability: All the drive I/O can be read or controlled over a network
  • Optional FR-PU07-01 keypad can be mounted remotely, display HAND/AUTO, and display the value of three monitors
  • Energy Savings: Optimum Excitation Control
  • 3 user programmable skip frequencies
  • Windmill start: Catch a reverse spinning load
  • Pre-charge mode
  • PID sleep mode
  • Second PID function
  • Regeneration avoidance
  • Built-in EMC filter: Conforms to EN61800-3 2nd environmental
  • UL Listed for single phase input

more info

A700

 

1.Brochure
2.Manual
3.Wiring
4.Dimensions

The A800 Series is Mitsubishi’s flagship inverter solution that delivers multi-use performance, accuracy and system flexibility in an ultra reliable hardware package designed for industrial use.

  • High Speed Response: With a speed response of 50Hz, A800 to respond to a change in motor load. A800 reacts to a speed signal much faster too – between 2 to 3 ms as opposed to 5 to 20 ms with A700.
  • Wide Speed Range: 200:1 speed range open loop, 1500:1 closed loop speed range.
  • Extended Maximum Speed: A standard A800 VFD can drive high speed motors at up to 590Hz, compared to the A700’s 400Hz.
  • IPM Motor Control: Standard A800 VFDs can drive the new generation IPM (Internal Permanent Magnet) motors, such as the Marathon ‘SyMAX’ series.
  • Safety Stop: A800 is a SAFETY drive. “STO” capability enables SIL2 / PLd category emergency stops.
  • Compatible with USB Stick: VFD settings can be easily uploaded or downloaded and ‘black box’ operating data at the time of a drive trip can be copied for diagnosis using the FR-Configurator software.
  • GOT interface: Automatic connectivity to GOT 2000 series GOTs without the need to change any parameters.
  • Improved PLC: A800 has a new internal PLC based around the Mitsubishi ‘L series’ processor. Instructions in the form of ‘Function Blocks’ can now be used.
  • Conformal Coating: All A800 VFDs have Conformal Coated boards as standard.
  • Separate rectifier stage: for drives over 500 HP – greater system flexibility.

A700

 

1.Brochure
2.Manual
3.Wiring
4.Dimensions

The F800 Series is a VFD range which has been optimized for maximum energy savings with pump and fan control. F800 is equally at home in an industrial environment or in the residential / commercial sector as part of an integrated HVAC solution.

  • NEMA 1 / UL-1 rated: F800 is Plenum-Rated and can be mounted as a stand-alone unit when required – no need to provide a separate enclosure*
  • Built-in BACnet MS/TP or Modbus RTU communications capability for simple integration into HVAC communication networks
  • Built-in filter to limit the effects of radio noise on sensitive equipment
  • Built-in PLC allows the drive to be customized to individual requirements and can avoid the need to have a separate master controller
  • Optimum Excitation Control: F800 uses vector drive technology to calculate motor load and ensures maximum energy savings, even if motor loading changes
  • 3 programmable skip frequencies: Avoid points of mechanical resonance in ducting and pipework.
  • Drive settings can be uploaded or downloaded using a standard USB memory stick
  • Real-time clock: Drive trip messages are ‘time stamped’ for diagnostic purpose **
  • Bi-Directional Coasting Motor Restart: F800 can safely ‘catch’ and control a motor which is already spinning (in either direction) on start-up.